Air Conditioning training courses and schools
Certificate, Diploma, AAS in HVAC programs, certificates, diplomas and degrees

Total 32 training course(s)/program(s) at schools in Australia.



Skills Institute

Training Centres/Campuses: Burnie, Hobart, Launceston, TAS, Australia
Phone No.: 1300 362 175

Air Conditioning - Split Systems

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Participants will cover the following:

Refrigeration and air conditioning fundamentals as applicable to air conditioning split systems.
Refrigeration procedures for joining/connecting copper tube as applicable to air conditioning split systems.
Refrigerants - including ozone depletion, codes of good practice and R410A certification.
Refrigeration system components as applicable to air conditioning split systems.
Residential air conditioning including installation, commissioning and decommissioning as applicable to air conditioning split systems.

Entry Requirements

Trade Certificate III in either electrical or plumbing.
Exposure within the last 3 years or currently working in the industry.
Your own hand and installation tools e.g. flaring tool, wrenches and appropraite hand tools, 410 gauges and multi meter.
On-site assessment tools e.g. vacuum pump, reclaim unit.
... [Read More]

Automotive Air Conditioning

Course Format: Public Course / Instructor-Led / Open Enrollment  V

In this course participants will gain the knowledge and skills needed to service, repair and install air conditioning systems for automotive applications. Successful completion will allow you to apply for an Australian Refrigeration Council (ARC) Air Conditioning Licence which is a national requirement for handling air conditioning refrigerants.

Participants will learn:

About legislative and documentary requirements for use of and safe handling of refrigerants.
About the technical skills needed to service, repair and install automotive
A/C systems.
To diagnose automotive A/C system faults and poor performance.


Polytechnic West

Training Centre/Campus: Perth, WA, Australia
Phone No.: (08) 9267 7500

Engineering (Pre-Apprenticeship Mechanical - Refrigeration and Air Conditioning) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing and drafting, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and maths. In this qualification you will learn in a simulated working environment and be exposed to an industrial setting on work experience. This means starting on time, setting goals, achieving work in a given time frame and working as part of a team.

Refrigeration and air conditioning mechanics�service and repair cooling systems. They regularly fix systems that have come to a halt because of electrical faults. A cooling system is made up of many different parts, including a compressor, motor and air filter. Piping may also need to be attached and joints soldered to complete a system. Refrigeration and ... [Read More]

Engineering (Split System Air Conditioning) Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course provides the training required for licence to install split air conditioning systems. You will learn skills in using tools, measuring and calculating, technical drawing and drafting, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and maths. You will practice the skills you have learned in a workshop environment.
What are the courses for further study and career opportunities?

Certificate III engineering qualifications, Apprenticeship/traineeship.

Successful completion of this qualification provides you with the opportunity to become a trades assistant, gain an apprenticeship in to become an electroplater, surface finisher, foundry worker, plant mechanic or ship builder, or gain a traineeship in engineering. You will need to be employed and registered as an apprentice/trainee before you can commence apprenticeship/traineeship training.

Engineering - Mechanical Trade (Refrigeration/Air Conditioning) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

This is a generic qualification for the mechanical trade that provides a number of pathways for apprenticeship. Learners would identify trade training in Machinist Metal, Mechanical Fitter, Metal Plating and Plant Mechanic.


SkillsTech Australia

Training Centre/Campus: Brisbane, QLD, Australia
Phone No.: 1800 654 447

Certificate III in Refrigeration and Air-Conditioning

Course Format: Public Course / Instructor-Led / Open Enrollment  V

If you’re looking for a fresh start in your career, complete this Certificate in Refrigeration and Air-conditioning. You’ll learn how to select components and install, test, fault find, repair and maintain refrigeration systems and equipment for food storage and preservation. You’ll also learn about air-conditioning and air distribution equipment in buildings and premises. This course includes regulatory requirements for purchasing and handling refrigerants.

What job opportunities will I have?

Upon successful completion of the program the apprentice will be trade qualified Refrigeration or Air-conditioning Mechanic.

Graduates may apply for a restricted electrical licence and a refrigerant handling licence.

Do I need to have prior knowledge or work experience?

Must be employed as an apprentice and have signed a Registered Training Contract.

What can I study after this?

Participants can continue... [Read More]

Refrigeration and Air Conditioning (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Sweltering Queensland summers demand air conditioning, so there’ll always be demand for qualified air conditioning and refrigeration mechanics in our state. This program will provide you with the skills and knowledge to work as a trade qualified engineering tradesperson in refrigeration and air-conditioning.

You’ll learn about occupational health and safety policies and procedures, planning and carrying out routine tasks, performing computations, interpreting technical drawings, and using hand and power tools.

Certificate II in Air-conditioning Split Systems

Course Format: Public Course / Instructor-Led / Open Enrollment  V

If you’ve got an electrical licence make a cool career change to air conditioning. In this post-trade program, you’ll learn how to position, assemble and start up single-head split air-conditioning units and systems to a prescribed routine. Successful completion of this program will enable you to apply for the licence required to install and decommission single-head, split system air-conditioners up to 18 Kilowatts.

Do I need to have prior knowledge or work experience?

Electricians:
Participants must hold an electrical licence or have completed stage 3B of apprenticeship training. It is recommended that participants are currently employed in an associated industry where they have access to assemble position, start up and decommission split systems air-conditioning units.


Non Electricians:
This program is for students who are Non Electrical Mechanics, therefore, these students will not be able to run any electrical cabling.

Air Conditioning Blue Card (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The course is a combination of Training and Recognition of your skills.

Here’s a course that’ll keep everyone comfortable. Complete a Certificate in Automotive Mechanical (Air Conditioning) and you’ll be able to fit, install, service and repair air-conditioning units in cars, trucks and vans, tractors and other machinery. You’ll learn how to complete minor repairs to electrical circuits/systems, use machines, tools and materials, and work safely in an industrial environment.


RMIT Training

Training Centre/Campus: Melbourne, VIC, Australia
Phone No.: 03 9925 8111

Certificate II in Engineering - Split Systems Air Conditioning

Course Format: Public Course / Instructor-Led / Open Enrollment

This course will give you the knowledge and experience to install and commission residential split system air conditioners.


Challenger Institute of Technology

Training Centres/Campuses: Fremantle, Henderson, Kwinana, Mandurah, Perth, Rockingham, WA, Australia
Phone No.: 08 9239 8189

AUTOMOTIVE AIR CONDITIONING SYSTEMS

Course Format: Public Course / Instructor-Led / Open Enrollment  V

To provide students with the skills and abilities for all aspects of automotive air conditioning service, maintenance and installation.

TARGET AUDIENCE
Qualified and experienced Automotive Technicians wishing to update their skills and knowledge.

CONTENT

W2825 Apply basic automotive troubleshooting processes
W5084 Carry out diagnostic procedures
W5151 Carry out fabrication of components
W2854 Carry out repairs to single electrical circuits
W5016 Install air conditioning systems
W5074 Repair/retrofit air conditioning systems
W5017 Service air conditioning systems
W5025 Use and maintain workplace tools and equipment
OUTCOMES
On successful completion individuals will have the skills to service, install and repair automotive airconditioning systems.


Canberra Institute of Technology

Training Centre/Campus: Canberra, ACT, Australia
Phone No.: +61 2 6207 3100

Refrigeration and Air Conditioning (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

Want to learn Refrigeration and Air Conditioning? Canberra Institute of Technology has such training program available, or provided Refrigeration and Air Conditioning training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with Canberra Institute of Technology's representative directly.


TAFE NSW Hunter Institute

Training Centre/Campus: Newcastle, NSW, Australia
Phone No.: (02) 4923 7222

Refrigeration and Air-Conditioning (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course is for refrigeration and air conditioning apprentices and
others employed in the industry.

You will learn to select, install, commission, maintain, fault-find and
repair refrigeration and air conditioning components and systems in
domestic, commercial and/or industrial applications.

This qualification meets the NSW Office of Fair Trading’s licensing
requirements for issuing "Qualified Supervisor’s Certificate -
Refrigeration and/or Air Conditioning". This permits the holder to work
unsupervised on refrigeration and/or air conditioning systems and
associated electrical work. It also meets the federal Ozone Protection and
Synthetic Greenhouse Gas Management Regulations 1995 and its 2005
Amendment requirements for the Full Refrigeration and Air Conditioning
Licence, which is required to handle a refrigerant for any work in the
refrigeration and industry, other than automotive industry.


Gordon Institute of TAFE

Training Centre/Campus: Geelong, VIC, Australia
Phone No.: 03 5240 2100

Air Conditioning - Split System Installation to 18 kw

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course is designed primarily for plumbing, mechanical, electrical and other tradespeople with some previous experience installing split system air conditioners (up to 18kw). Upon successful completion of the course students will receive certification to allow them to apply to ARCTick (Australian Refrigeration Council) for the licence. Note: Enrolments should be submitted at least three weeks prior to course commencement (where vacancies exist) to allow time for ARCTick to process the Trainee Licence application. Participants are advised to contact the Plumbing Industry Commission (Telephone: 1800 015 129) or relevant state licensing organisation PRIOR to enrolling in the course to ensure they can become licensed upon course completion.

Content
This course covers the accredited unit: �MEM20105 Certificate II in Engineering (Air Conditioning).

Pages: 1 2 3

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses