Automation training courses and schools
Industrial Automation & Control programs, certificates, diplomas and degrees

Total 31 training course(s)/program(s) at schools in Australia.



DDLS

Training Centres/Campuses: Adelaide, Brisbane, Canberra, Melbourne, Perth, Syndey, , Australia
Phone No.: 1800 ULEARN (853 276)

VMware vRealize Automation: Install Configure Manage

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This training course focuses on installing, configuring, and managing VMware vRealizeâ„?Automation. This course covers the configuration and use of the vRealize Automation platform, including self-service provisioning and the creation of multivendor
cloud services. This class also helps students understand and achieve the benefits of automation as a component of the software-defined data center.

By the end of the course, you should be able to meet the following objectives:
•Describe the vRealize Automation architecture and use case in today’s multivendor cloud environments
•Install and configure vRealize Automation 6.2
•Deploy Distributed Execution Managers and agents for vRealize Automation connectivity
•Configure endpoints to support compute fabric connectivity
•Manage vRealize Automation 6.2 entities on VMware hardware, third-party hardware, and cloud infrastructures
•Configure vRealize Automation infrastructure services
•C... [Read More]

VMware vCloud Automation Center: Install, Configure, Manage (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This training course focuses on installing, configuring, and managing VMware vCloud® Automation Center� This course covers the configuration and use of the vCloud Automation Center platform, including self-service provisioning and the creation of multivendor cloud services.

By the end of the course, you should be able to meet the following objectives:
•Understand the vCloud Automation Center architecture and use case in today’s multivendor cloud environments
•Install and configure vCloud Automation Center 6.0
•Deploy Distributed Execution Managers and agents for vCloud Automation Center connectivity
•Configure endpoints to support compute fabric connectivity
•Manage vCloud Automation Center 6.0 entities on VMware® hardware, third-party hardware, and cloud infrastructures
•Configure vCloud Automation Center infrastructure services
•Configure and manage tenants and blueprints
•Configure and manage a service catalog
•Conf... [Read More]

Test Automation, Web Performance and Load Testing with Visual Studio 2013 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This two-day course is designed for automation and performance testers who have basic .NET coding skills. The course is divided into two main parts. The first focuses on creating, executing and maintaining Coded UI Tests while the second part looks at Web Performance and Load Testing using Visual Studio 2013.

This course includes hands-on labs to reinforce practical skills and ensure you’re ready to use the tools on your return to your workplace.

At the completion of this course, attendees will be able to,
•Understand the role of a tester in modern Agile teams
•Describe the testing capabilities of the Visual Studio ALM product suite
•Create Coded UI Tests from action recordings and using the Coded UI Test Builder
•Understand the structure of Coded UI Tests and edit the generated code
•Understand how objects are found and modify this behaviour
•Extend your Coded UI Tests through code
•Bind Coded UI Tests to a variety of ... [Read More]

Marketing Automation in Microsoft Dynamics CRM 2011 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course introduces you on how to use Microsoft Dynamics CRM to extend the effectiveness of your marketing department and provides context of how to use things such as marketing campaigns, marketing lists, and campaign templates in Microsoft Dynamics CRM. It also discusses the role of campaign activities and marketing lists in campaigns and discusses how to associate sales literature, target products and price lists with marketing campaigns.

After completing this course, students will be able to:
•Examine the benefits of closed loop marketing
•Create and use marketing lists
•Introduce quick campaigns and marketing campaigns
•Plan marketing campaigns and create and use templates
•Import leads
•Associate sales literature, target products and price lists with marketing campaigns
•Capture and manage campaign responses
•Create and manage sales goals for individuals and teams within your organization
•Use Personal Charts, ... [Read More]


SkillsTech Australia

Training Centre/Campus: Brisbane, QLD, Australia
Phone No.: 1800 654 447

Certificate III in Security Equipment

Course Format: Public Course / Instructor-Led / Open Enrollment  V

What will I get out of this program?

This qualification provides competencies in installation and pre-commissioning set up of wired and wireless security systems in multiple, commercial industrial premises.

What job opportunities will I have?

The successful completion of this program will enable the participant to work as a Security System Tradesperson or Electronic Equipment Tradesperson.

Do I need to have prior knowledge or work experience?

Students must be employed as an apprentice and must have signed a Registered Training contract as an apprentice to be eligible to undertake training in this program.

Certificate III in Instrumentation and Control

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Take a systematic approach to achieving your goal to work as a trade qualified instrument technician by completing this apprenticeship. This program will provide you with the skills and knowledge to select, install, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control.

What job opportunities will I have?

Successful completion of this program will enable participants to work as an Instrument Technician.

Do I need to have prior knowledge or work experience?

Participants must be employed as an apprentice and must have signed a Registered Training Contract.

What can I study after this?

Further studies in Certificate IV qualifications.


RMIT Training

Training Centre/Campus: Melbourne, VIC, Australia
Phone No.: 03 9925 8111

KNX Building Automation Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course provides the knowledge and skills that enable participants to become basic level accredited KNX building automation technicians. KNX is a worldwide standard for home and building control automation and this course will introduce participants to the interoperability and interworking of this protocol. The full KNX accreditation requires successful completion of the basic and advanced training courses. This course is the basic accreditation only. It allows participants to develop skills to work on KNX based equipment to a level of basic understanding.

Industrial HiVision

Course Format: Public Course / Instructor-Led / Open Enrollment

Participants learn the functions of Industrial HiVision, and reinforce this knowledge with practical exercises. Following this two-day course, participants can make effective use of Industrial HiVision to supervise and configure any size of Ethernet network.

Industrial Routing

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course builds on the experience gained from Industrial Networking (CT2), providing network experts with intensive theoretical and practical knowledge about unicast and multicast routing. Special emphasis is placed on deploying routing protocols in complex industrial environments. This enables participants to provide comprehensive support, both for demanding projects and their daily work.

Industrial Networking

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course builds on the experience gained from Industrial Ethernet (CT1), providing network experts with intensive theoretical and practical knowledge about TCP/IP, IP communication and multicasting. Special emphasis is placed on deploying TCP/IP and multicasting in complex industrial environments. This enables participants to provide comprehensive support, both for demanding projects and their daily work.

Industrial Ethernet

Course Format: Public Course / Instructor-Led / Open Enrollment  V

In this Industrial Ethernet course participants will learn details of the technical fundamentals and deployment objectives of the world&,#146,s most widely used LAN communication protocol. At the end of the course participants will have a good understanding of Ethernet, as well as its role in industrial networking, both now and in the future. For additional topics related to industrial Ethernet, participants should attend the Industrial Networking (CT2) training course


Adaptive Embeddeed Solutions

Training Centre/Campus: Adelaide, South Australia, Australia
Phone No.: 0466553858

Basic for Industrial Automation using programmable logic controllers(PLC) Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Basic training of Industrial Automation using programmable logic controllers (PLC)
Topics cover the followings:
1. Introduction to Automation
2. PLC Hardware/Software
3. Relay/Digital logics
4. Ladder logic programming
5. Functional block programming
6. PLC scan cycle
7. Bit, Byte and word instructions
8. Upload/Download/Monitoring of program
9. Analog and Digital I/O Addressing
10. PLC trouble shooting
11. Panel wiring and designing
12. Various application examples
Above trainings will be conducted with the major brand PLC controllers available with us.

Visit our website for more details about the various services we offer. As we are involved in various project activities in the day time, these courses can be conducted in part time.
Website: www.adaptiveembeddedsolutions.com.au
Contact details:
Adaptive Embedded solutions
Plympton-5038
Email: mrama@adaptiveembeddedsoluti... [Read More]


School of Electrical Engineering and Computer Science at the University of Newcastle

Training Centre/Campus: Newcastle, NSW, Australia
Phone No.: +61 2 4921 6091

Automatic Control

Course Format: Public Course / Instructor-Led / Open Enrollment  V


This course treats the basic principles of the automatic control of industrial processes and machines. The emphasis of the subject is on continuous time control, although some introductory material on sequential logic control (or programmable logic control) is included. On completing the course, students should be able to:

1. formulate quantitative models of feedback control systems built from mechanical, chemical, electrical and electronic components described by linear, ordinary differential equations
2. analyse single input, single output feedback control systems for stability, steady state and transient performance
3. understand the scope and limitations of fundamental control strategies, and be able to design simple compensation schemes for improved control, and
4. understand the basics of using programmable logic controllers (PLCs) in implementing switching control systems.


Content

1. Dynamic models: Diff... [Read More]


Holmesglen

Training Centres/Campuses: Chadstone, Melbourne, Moorabbin, Waverley, VIC, Australia
Phone No.: 1800 800 007

Computer Skills For The Office

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Fast track your computer skills as you develop the knowledge and confidence to match your skills with those required for employment in an office. Learn basic computer applications and document standards used in today&,#146,s office environment, such as, Word Processing, Spreadsheets and PowerPoint to produce document layouts for business letters, reports, displays, tables, tabulation and charts. Basic computer skills are essential.

Students will: Develop knowledge and skills in using Word, Excel and PowerPoint for practical tasks Gain skills in document presentation such as letters, reports, displays, tables, tabulation charts and so on Become familiar with basic requirements of working in an office situation Be prepared with basic skills and knowledge to gain employment in an office situation

Pages: 1 2 3

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses