Automotive training courses and schools
Automobile/Vehicle Repair programs, certificates, diplomas and degrees

Total 215 training course(s)/program(s) at schools in Australia.



West Coast Institute of Training

Training Centre/Campus: Perth, WA, Australia
Phone No.: 1300 134 881

Certificate III in Automotive Electrical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive electrical technology sector which includes inspection, service and repair. It also provides you with the opportunity to specialise in an industry sector by selecting the relevant descriptor specific to your enterprise requirements. You will develop skills contained in the units of competence relevant to the descriptors. You will also learn how to apply safe work practices and carry out diagnostic procedures.

Certificate II in Motorsport

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the motor sport industry sector. You will develop skills in inspecting and servicing engines, braking systems, cooling systems, steering and suspension systems, carrying out repairs to single electrical circuits and testing, servicing and charging batteries.

You will also learn how to apply safe work practices and operate in a motor sport environment.

Certificate II in Automotive Electrical

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive electrical technology sector. You will develop skills in carrying out soldering of electrical wiring circuits, removing and replacing electrical and electronic unit assemblies, testing, servicing and charging batteries, installing, testing and repairing low voltage wiring and lighting systems and using and maintaining workplace tools and equipment. You will also learn how to apply safe work practices and apply environmental regulations and best practice in a workplace or business.

Certificate II in Automotive Vehicle Servicing

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive vehicle servicing sector. You will learn skills in carrying out servicing operations, inspecting and servicing engines, steering and suspension systems, carrying out repairs to single electrical circuits and using and maintaining workplace tools and equipment. You will also learn how to apply safe work practices and apply basic automotive troubleshooting processes.


Tasmanian Polytechnic

Training Centres/Campuses: Burnie, Devonport, Hobart, Invermay, Launceston, Newnham, Smithton, TAS, Australia
Phone No.: 1300 655 307

Automotive Vehicle Servicing (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

All program, subject and course offerings are correct at the time of publishing but may be subject to variation, availability and suitability.

Outcome: Statement of Attainment for selected units

You will learn about:

routine servicing of cooling systems, diesel or petrol fuel injection systems, exhaust and breaking systems final drive assemblies, steering and suspension systems and transmissions specialising in light and heavy vehicles and motorcycles.

To enrol in this program you will need:

basic skills in literacy, numeracy, computer, comprehension

This program:

leads to apprenticeship / employment

Automotive Vehicle Body Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course provides the knowledge and skills enabling graduates to specialise in: Paint Preparation - in preparation for painting there are masking procedures, preparing spray painting materials and equipment, carrying out minor paint repairs and, buffing and preparing for customer use. Panel Preparation - under the supervision of a tradesperson assisting with motor vehicle body repairs.

Vehicle Presentation - in a car yard, garage or detailing workshop washing, scrubbing and polishing the interior and exterior of cars, buses and trucks to clean and protect the appearance of vehicles and components.

You will learn about:

paint preparation
panel preparation
vehicle preparation

To enrol in this program you will need:

basic literacy, numeracy, computer and comprehension skills

This program:

leads to apprenticeship/employment

Automotive Mechanical (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

All program, subject and course offerings are correct at the time of publishing but may be subject to variation, availability and suitability.

This course provides the knowledge and skills enabling graduates to perform routine servicing of cooling systems, diesel or petrol fuel injection systems, exhaust, braking systems, final drive assemblies, steering and suspension systems and transmissions specialising in light vehicles or heavy vehicles and/or motorcycles.

You will learn about:

routine servicing of cooling systems, diesel or petrol fuel injection systems, exhaust and braking systems, final drive assemblies, steering and suspension systems and transmissions specialising in light and heavy vehicles and motorcycles.

To enrol in this program you will need:

basic skills in literacy, numeracy, computer, comprehension

This program:

leads to apprenticeship/employment

Automotive Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

You will learn about:

preparation, use and maintenance of resources for the automotive workshop
selection and use of appropriate equipment e.g. spanners, hacksaws, measuring devices, floor jacks
automotive principles and systems e.g. cooling, fuel, ignition, lubrication, electrical
techniques used in the automotive workshop e.g. dismantling and reassembling of components,

To enrol in this subject you need:

no previous experience

This subject:

is a pathway to Certificate II Automotive


Victorian Institute of Technology

Training Centre/Campus: Melbourne, VIC, Australia
Phone No.: (613) 9670 7848

Certificate III in Automotive Mechanical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification provides students with the skills and knowledge used in the automotive mechanical technology sector. Students learn to inspect, service and repair light vehicles, apply safe working practices, carry out work observing environmental regulations and carry out diagnostic procedures. Students will work towards becoming Motor Mechanics and will learn how to diagnose, service and repair faults in light vehicle engines, fuel systems, manual and automatic transmissions, suspension, steering, drivelines, final drives, brakes and electrical systems and components..

AURC270103A

Apply Safe Working Practices

AURT271781A

Implement and monitor environmental regulations in the automotive mechanical industry


AURE218676A

Test, Service and Charge Batteries


AURTL315166A

Repair Steering Systems (light vehicle)


AURT310166A

Repair Hydraulic Brak... [Read More]


Skills Institute

Training Centres/Campuses: Burnie, Hobart, Launceston, TAS, Australia
Phone No.: 1300 362 175

Automotive Air Conditioning

Course Format: Public Course / Instructor-Led / Open Enrollment  V

In this course participants will gain the knowledge and skills needed to service, repair and install air conditioning systems for automotive applications. Successful completion will allow you to apply for an Australian Refrigeration Council (ARC) Air Conditioning Licence which is a national requirement for handling air conditioning refrigerants.

Participants will learn:

About legislative and documentary requirements for use of and safe handling of refrigerants.
About the technical skills needed to service, repair and install automotive
A/C systems.
To diagnose automotive A/C system faults and poor performance.


Polytechnic West

Training Centre/Campus: Perth, WA, Australia
Phone No.: (08) 9267 7500

Recreational Vehicle Manufacture (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with the practical skills and knowledge to work in the recreational vehicle manufacturing area of the caravan industry. You will learn skills to apply quality standards, construct floors, walls and roof for a recreational vehicle. You will also learn how to install 12/24 volt DC cabling and or LP gas systems in a recreational vehicle depending on the elective subjects you choose.
What are the courses for further study and career opportunities?

Certificate III in Recreational Vehicle Manufacturing

Successful completion of this qualification provides the opportunity to gain entry level employment in the recreational vehicle manufacturing industry.

Automotive LPG

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This 5 day LPG Service and Repair course will provide you with the knowledge and understanding of the five different generations of LPG systems so that you will be able to safely service and repair all aspects of these systems. Prior to attending this 5 day course an online legislation component will need to be completed. At the completion of the 5 day course you will be awarded with a certificate to enable you to apply for an ‘E?Class Permit restricted to Repair and Service of LPG systems.

This course is aimed at all persons wishing to obtain the necessary licence/s and qualifications to carry out servicing and repair of liquified Petroleum Gas on Automotives.

Interested applicants should: Possess a Certificate III trade qualification or higher level qualification in Automotive studies, have relevant/long term automotive industry experience, be mature aged, and have a practical knowledge of automotive tools with a high level of hand skills.

Read More]

Automotive Cng

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Polytechnic West’s 5 day course in CNG Repair and Service will give you the opportunity to train now for the inevitable changes to alternative fuel methods in the future. CNG has risen to prominence in Australia as an alternative transport energy source due to the abundance of natural gas reserves in the country. Prior to attending this 5 day course an online Legislation component will need to be completed. At the completion of the 5 day course you will be awarded with a certificate to enable you to apply for an ‘E?class Permit restricted to Repair and Service of CNG systems.

This course is designed for personnel who possess a Certificate III trade qualification or higher level qualification in Automotive studies
- Have relevant/long term automotive industry experience
- Are mature age,
- Have a practical knowledge of automotive tools with a high level of hand skills.

Content
You’ll learn about
- The differ... [Read More]

Automotive LNG

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This newly accredited 5 LNG Service and Repair Course will provide the mechanic/service technician with the necessary skills to service and repair previously installed mobile LNG systems.

Liquid Natural Gas (LNG) has risen to prominence in Australia as an alternative transport energy source due to the abundance of natural gas reserves in the country.

Prior to attending this 5 day course an online Legislation component will need to be completed. At the completion of the 5 day course you will be awarded with a certificate to enable you to apply for an ‘E?Class Permit restricted to Service and Repair of LNG systems.

The course is designed for personnel who Possess a Certificate III trade qualification or higher level qualification in automotive studies, have relevant/long term automotive industry experience, are mature age, and have a practical knowledge of automotive tools with a high level of hand skills

Content
- Practi... [Read More]

Pages: 1 2 3 4 5 6 ...

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses