Electrical training courses and schools
Electrical Engineering programs, certificates, diplomas and degrees

Total 204 training course(s)/program(s) at schools in Australia.



West Coast Institute of Training

Training Centre/Campus: Perth, WA, Australia
Phone No.: 1300 134 881

Certificate III in Automotive Electrical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive electrical technology sector which includes inspection, service and repair. It also provides you with the opportunity to specialise in an industry sector by selecting the relevant descriptor specific to your enterprise requirements. You will develop skills contained in the units of competence relevant to the descriptors. You will also learn how to apply safe work practices and carry out diagnostic procedures.

Certificate II in Automotive Electrical

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive electrical technology sector. You will develop skills in carrying out soldering of electrical wiring circuits, removing and replacing electrical and electronic unit assemblies, testing, servicing and charging batteries, installing, testing and repairing low voltage wiring and lighting systems and using and maintaining workplace tools and equipment. You will also learn how to apply safe work practices and apply environmental regulations and best practice in a workplace or business.


Skills Institute

Training Centres/Campuses: Burnie, Hobart, Launceston, TAS, Australia
Phone No.: 1300 362 175

Restricted Electrical

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course focuses on how to disconnect and reconnect fixed wired electrical equipment connected to a low voltage supply. This may be incidental to, or a primary part of a principle work function. It includes safely testing and reporting. Participants must also obtain a Statement of Attainment for “Perform CPR� “Provide Basic Emergency Life Support�and “Fire Safety�training. This training is available for an additional fee.

Training can be held on-the-job or off-the-job. After successfully completing off-the-job training you will practice your skills under the direct supervision of a suitably qualified person and log your experience. After successfully completing on-the-job training, contact us to arrange an on-the-job final assessment when you are ready.

Grid Connect Photovoltaic for Electricians & Electrical Engineers Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This short course is suitable for:

(GC-1) Electricians who install PV Systems which are designed and supplied by a third party.
(GC-D ) Electricians and Engineers who design systems for other electricians to install.
(GC-D&,1) The Principal of a contracting business or project manager who is a licensed electrician and wishes to have control over both the design and install aspects of Grid Connect PV jobs.

It includes practical installations of Photovoltaic systems conducted using industry standard hardware. Learn via a combination of workshops at our training facilities and research/homework.


Polytechnic West

Training Centre/Campus: Perth, WA, Australia
Phone No.: (08) 9267 7500

Electrical Fitting (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with the skills and knowledge to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery. You will learn to solve problem in d.c. circuits and in single and three phase low voltage machines, develop and connect electrical control circuits and use diagrams, standards, codes and specifications.
What are the courses for further study and career opportunities?

Certificate IV in Electrotechnology qualifications

Successful completion of this qualification provides you with the opportunity to become an electrical fitter.

Testing And Tagging Of Electrical Equipment

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Program Overview:
This course will cover the reasoning behind testing and tagging and make participants aware of safety practices when performing tests.
The RCD component involves basic electrical theory, how an RCD works, what records need to be kept and how to correctly test an RCD device.

Designed for:
People who would like to safety test electrical cord assemblies and cord connected equipment in the workplace.

Content:
This unit of competency covers safety testing of electrical cord assemblies and cord connected equipment. It encompasses working safely, using portable apparatus tester, applying tagging, arranging for repair of faulty equipment and complete testing documentation.

The course will include:
�The reason behind testing and tagging
�Work Safe Legislation for testing and tagging
�Work through AS3760 in-service testing and tagging
�Identify Class I and Class II appliances
Read More]

Electrical - Photovoltaic Systems (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Polytechnic West only delivers a specific skillset out of this course, not the complete course.

This skill set has been created to meet the requirements of a Clean Energy Council accredited pathway to support Renewable Energy Certificates for Solar Energy Systems.

�Clients undertaking the Skill set Photovoltaic (PV) Grid Design will be:
‘Unrestricted Licensed Electricians� Self employed, seeking increased skills to run their own business
Clients that are currently employed but need to update skills
Clients changing careers, re-skilling or re-entering the workforce

�Clients undertaking the Skill set Photovoltaic (PV) Grid Install and Grid Connect are required to hold an ‘Unrestricted Electricians Licence�or equivalent issued in an Australian State or Territory

OR

�Those able to satisfy the ERAC requirements for the issue of an ‘Unrestricted Electricians Licence&,#146,.
�Ap... [Read More]

Engineering - Electrical/Electronic Trade (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with the essential skills and knowledge that complement the on-the-job skills of the apprenticeship in the electrical /electronic trade. You will learn skills including electrical systems safety, measurement, testing and fault diagnostics and interpret technical drawing. You will also learn about effective workplace communication, apply quality procedures and apply principles of occupational health and safety.
What are the courses for further study and career opportunities?

Certificate IV in Engineering

Successful completion of this apprenticeship qualification provides you with the opportunity to become a trade person in the electrical/electronic industry.

Automotive Electrical Technology Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive electrical technology sector. Learn how to repair electrical circuits, use and maintain testing equipment and measuring devices, service and repair batteries, remove and tag automotive electrical system components and much more. This qualification will give you the advantage when you approach an employer for an apprenticeship.

Polytechnic West is the only TAFE College in the State that offers this qualification. Carlisle Campus is WA&,#146,s major centre for automotive studies and panel beating. Automotive apprentices and pre-apprentices at Polytechnic West enjoy access to hundreds of thousands of dollars worth of equipment to train on, including vehicles, specialised automotive repair and diagnostic equipment, fully equipped spray painting ovens, specialised workrooms and workshops. This excellent training program is highly competitive. With dedicated industry-experienced lectu... [Read More]


South West Institute of Technology Bunbury Campus

Training Centre/Campus: Bunbury, WA, Australia
Phone No.: (08) 9780 7000

ELECTROTECHNOLOGY (CAREER START) [PRE APPRENTICESHIP ELECTRICAL] Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with practical skills and knowledge to install, operate, and maintain electrical and communications equipment and systems for domestic, business and industrial markets. You will learn skills that enable you to use tools, take electrical measurements and interpret technical drawings. You will also learn about maths, safety in the workplace and quality control procedures. You will practice the skills you have learned in a workshop environment and undertake a supervised work placement.

CAREER OPPORTUNITIES
Successful completion of this qualification provides you with the opportunity to gain an apprenticeship to become an electrician. You will need to be employed and registered as an apprentice/trainee before you can commence apprenticeship/traineeship training. Qualified electricians can undertake further study in the area of instrumentation and control.


RMIT University

Training Centre/Campus: Melbourne, VIC, Australia
Phone No.: +61 3 9925 2000

Master of Engineering (Electrical and Electronic Engineering)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Advance your engineering career with postgraduate studies. This program will broaden and sharpen your technical skills in electrical, electronic, telecommunication, computer and network engineering.

You&,#146,ll graduate with leading-edge technical knowledge, and professional skills in research, communication, teamwork, leadership and management.

RMIT offers a variety of learning and teaching approaches including lectures, seminars, studios, workshops, presentations, group discussions and syndicate work. These are primarily in English.

You will have access to the Learning Hub and other online and digital resources through the myRMIT student portal.

Ongoing assessment throughout the semester includes examinations, essays, reports, oral classes, presentations, group projects, research projects, laboratory projects and practical assignments.

Program structure
The Master of Engineering (Electrical and Electronic Engin... [Read More]

Master of Engineering (Electrical Engineering) Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Prepare for a leadership role in the internationally fast-growing sectors of power engineering and energy.

You&,#146,ll focus on technical areas of electrical engineering, including renewable energy and high-voltage systems.

The program will suit you if you&,#146,re an electrical engineer graduate wanting specialist knowledge in the latest power engineering technologies, or you&,#146,re a graduate from another discipline seeking a career change to this sector.

As a graduate, you&,#146,ll have leading-edge knowledge and skills in power engineering with effective business skills in communication, teamwork and management.
RMIT offers a variety of learning and teaching approaches including lectures, seminars, studios, workshops, presentations, group discussions and syndicate work. These are primarily in English.

You will have access to the Learning Hub and other online and digital resources through the myRMIT student ... [Read More]


SkillsTech Australia

Training Centre/Campus: Brisbane, QLD, Australia
Phone No.: 1800 654 447

Certificate IV Higher Engineering Trade (Electrical)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This apprenticeship program provides the skills and knowledge required for higher-level engineering industry skill outcomes, with multiple exit points bewteen trade and post-trade levels.

Competencies can be drawn from three broad engineering streams: mechanical, electrical/electronic and fabrication, as well as other streams within the competency standards.

This program is suitable for apprentices who require a greater range of skills than provided for the base trade outcome.

Advanced Diploma of Engineering Technology - Electrical

Course Format: Public Course / Instructor-Led / Open Enrollment  V

You don’t have to stop working to advance in your electrical career, you can complete this Diploma in the evening. This qualification will provide you with skills to design and validate/evaluate electrical equipment/systems and provide technical advice/sales.

Successful completion of this program will enable you to design, validate, evaluate electrical/electronic systems containing communication equipment, variable speed drives, analogue/digital electronics, programmable logic controllers (PLCs) and renewable energy(design and application).

What job opportunities will I have?

Upon successful completion participants are able to work within, Electrical/Electronics Designer, Electronics Technician, Equipment Manufacturer/Repairer or Industrial Designer.

Do I need to have prior knowledge or work experience?

Recommended Sound Achievement in Year 12 English and Maths or through successfully QTAC Application.

Pa... [Read More]

Pages: 1 2 3 4 5 6 ...

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses