Heavy Equipment training courses and schools
Heavy Equipment Operator programs, certificates, diplomas and degrees

Total 49 training course(s)/program(s) at schools in Australia.



Transqual Pty Ltd

Training Centres/Campuses: Brisbane, Melbourne, Newcastle, Townsville, , Australia
Phone No.: 1300 55 40 77

Crane Operations (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Individuals operating as stevedores with performance of a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.

PRE-REQUISITES

Must have attained the TLI21410 Certificate II in Stevedoring or be able to demonstrate equivalent competence.

COURSE COMPLETION REQUIREMENTS

A successful assessment outcome for a total of 9 units of competency comprising:

3 units within one selected group (job role), as listed below

plus

6 elective units from the elective units listed below, or may include up to 3 units which may be drawn with appropriate contextualisation from this Training Package, and/or from other relevant nationally endorsed Training Package or accredited course.
Read More]


Skills Institute

Training Centres/Campuses: Burnie, Hobart, Launceston, TAS, Australia
Phone No.: 1300 362 175

Tractor Operations

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This hands-on course provides the basic skills and knowledge needed to operate a tractor safely and is suitable for beginners through to more experienced operators. All training is underpinned by OHS principles and legislative requirements. This course can be combined with front-end loader training if required.

Participants will learn:

Safe operating procedures and the legislative requirements related to
machinery operations.
Various operating techniques and work procedures.
Correct shutdown procedures.
About safety requirements and equipment.
About daily service and maintenance checks.


Open Training and Education Network

Training Centre/Campus: Strathfield, NSW, Australia
Phone No.: 1300 362 346

Operate Tractors

Course Format: Online / Virtual Classroom / Webinar  V

At the completion of this program students will have done the required training and assessment to achieve competency AHCMOM202A Operate Tractors from the ACH10 Training Package. By achieving this unit of competency you will gain knowledge and skills related to operation of tractors. You will learn the skills to safely utilise the various components and controls of tractors, and set and secure equipment for operation. You will also learn the special characteristics of individual tractors including rated power, and steering &, hydraulic systems. Competence in tractor operation requires you to achieve an awareness of licensing and legislative requirements, plus duty of care to yourself, others and the environment. Upon completion you will be competent to safely operate tractors under minimum supervision.


Great Southern Institute of Technology

Training Centres/Campuses: Albany, Denmark, Katanning, Mount Barker, WA, Australia
Phone No.: 08 9892 8888

Operate a Vehicle Mounted Loading Crane (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone who wishes to obtain a vehicle mounted loading crane high risk licence from WorkSafe WA is required to complete this training.

Course Aim

To provide trainees with the knowledge and skills required to gain a WorkSafe Licence to Perform High Risk Work in Vehicle Mounted Loading Crane.

Course Content

The course covers:

Pre-operational checks
Site / job planning
Crane set up
Crane operations
Parking and shut down procedures
Risk assessment
Communication with doggers and other authorised personnel
Dogging duties &, responsibilities
Fibre, steel ropes and chains
General lifting practices
Elementary mathematics
Safe working loads and safety factors

Scaffolding Operations (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone who wishes to obtain a basic scaffolding high risk licence from WorkSafe WA is required to complete this training.

Course Aim

To provide trainees with the knowledge and skills required to gain a WorkSafe Licence to Perform High Risk Work in Basic Scaffolding Operations.

Course Content

The course covers:

Plans &, work instructions
Safety requirements
Signage &, barricades
Plant tools &, equipment
Material quantity requirements
Environmental protection requirements
Expected load and support structure
Set out and erection of scaffold
Scaffold stability
Scaffold dismantling and clean up

Operate a Boom Type Elevating Work Platform (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone who wishes to obtain a high risk operators licence for elevating work platforms with a boom length of 11 metres or more.

Course Aim

To provide trainees with the knowledge and skills required for assessment to gain a WorkSafe Licence to Perform High Risk Work in the operation of a Boom Type Elevating Work Platform. This licence is required by operators of EWP&,#146,s with a boom length of 11 metres or more.

Course Content

The course covers:

Performing daily maintenance
Performing pre-start checks
Setting outriggers prior to operation
Identifying operating hazards
Planning work
Setting up and taking down
Operating controls
Performing manual descent and emergency stops.

Forklift (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone who wishes to obtain a forklift high risk licence from WorkSafe WA is required to complete this training.

Course Aim

To provide trainees with the knowledge and skills required to gain a WorkSafe Licence to Perform High Risk Work in Forklift Operation.

Course Content

The course covers:

Safe forklift operation
Daily pre-start, pre-operational and shutdown checks
Forklift stability
Load capacity plates
Load Centre
Stability Triangle
Load Position on Forks
Longitudinal &, Lateral Instability
Operating procedure
Pick Up &, High Stacking Loads
Stacking and De-stacking
Travelling
Steering, Tail Swing &, Turning
Ramps
Park Up
Refuelling and Recharging
Bridge plates
Forklift attachments

Dozer (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone wishing to enter the industry who require operator training.

Course Aim

To train novice operators in the skills required to enter the industry as a certified dozer operator.

Course Content

The course covers:

Plan and prepare for dozer operations
Conduct machine pre-operational checks
Operation of a dozer
Select, remove and fit attachments
Relocating the dozer
Carry out machine operator maintenance
Clean up
Adopting safe work practices

Haul Truck (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Anyone wishing to enter the industry who require operator training.

Course Aim

To train novice operators in the skills required to enter the industry as a certified haul truck operator.

Course Content

The course covers:

Plan and prepare for haul truck operations
Conduct machine pre-operational checks
Operation of a haul truck
Load, haul and dump materials
Carry out machine operator maintenance
Clean up
Adopting safe work practices


IS Australia

Training Centre/Campus: Winnellie, NT, Australia
Phone No.: 1300 0 CAREERS (1300 0227 3377)

Crane Non-Slewing (Franna)

Course Format: On-Site / In-House / Private Tutoring  V

This course provides the formal training required for the safe operation
of a mobile slewing crane including, set up, care and maintenance,
operations, selection and use of lifting gear as well as calculation of
loads and use of load charts.
This course is highly recommended for people involved in operating or
working with Non-slewing cranes.
Course Topics
?Plan work ?Travel crane
?Check controls and lifting gear ?Conduct routine checks
?Secure load ?Set up crane
?Transfer loads ?Conduct trial lift
?Conduct multiple lifts

Mobile Slewing Crane

Course Format: On-Site / In-House / Private Tutoring  V

This course provides the formal training required for the safe
operation of a mobile slewing crane including, set up, care and
maintenance, operations, selection and use of lifting gear as well as
calculation of loads and use of load charts.
This course is highly recommended for people involved in operating
or working with mobile slewing cranes up to 60 tonnes.
Course Topics
?Plan work ?Travel crane
?Check controls and lifting gear ?Conduct routine checks
?Secure load ?Set up crane
?Transfer loads ?Conduct trial lift
?Conduct multiple lifts

Forklift

Course Format: On-Site / In-House / Private Tutoring  V

This course provides students with the skills and knowledge required to
operate a forklift safely and effectively. This course is designed to meet
the requirements of the National Standard for licensing persons
performing high risk work.
Students will learn how to perform routine equipment checks, including
pre-start drills, plan work, check controls, operate the equipment and
shut down the equipment safely.
This course is essential for people who are required to operate a forklift in
the course of their employment.
Course Topics
?Conduct pre-start checks ?Compliance with OH&,S and licensing
legislation
?Check controls ?Risk assessment and hazard control
strategies
?Operate a forklift to handle
loads
?Drive and operate the forklift
?Monitor site conditions ?Monitor and maintain forklift performance


Australian Skills Training Pty Ltd.

Training Centres/Campuses: Darwin, Perth, , Australia
Phone No.: +618 9434 3744

EXCAVATOR (Certificate)

Course Format: On-Site / In-House / Private Tutoring  V

This course is designed to provide participants with formalized training in Excavator operation, in a safe manner. Many operators have gained experience by just “having a go? Completion of this course will provide a recognized qualification with participants being able to conduct pre-start and pre-operational checks, recognize danger areas and operate a back hoe/front end loader correctly and safely through all areas of operation.

Pre requisite
Participants require evidence of previous experience operating under supervision.

Course Content
The Excavator training plan is based on the Unit of Competencies within the Australian Qualification Framework (AQF):

UEPOPS201A - Comply with Occupational Health and Safety Policy and Procedures
UEPOPS225A - Shift and Transfer Materials using an Excavator

Legislation in the Workplace - O.S.H. Acts and Regulations, Mines Safety Inspection Act and Regulations, [NOHSC 7019 (1992)] Na... [Read More]

Pages: 1 2 3 4

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses