Mechanic training courses and schools
programs, certificates, diplomas and degrees

Total 163 training course(s)/program(s) at schools in Australia.



ESD Simulation Training

Training Centre/Campus: Perth, Western Australia, Australia
Phone No.: 08 9355 5599

Mechanical Aspects of Centrifugal Gas Compressors (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

It is an add-on to our Control &, Operation of Centrifugal Compressors training course but is also run as a stand-alone package.

Suitable For: People involved in the specification, maintenance, and inspection of compressors. The course would also be useful for personnel who are responsible for the operation of centrifugal compressors.

Key Topics Covered:

Principles of Operation
Designs
Construction
Configurations
Rotor Assembly
Casing/Shaft Seals
Lubrication
Condition Monitoring
Gas Cooling
Liquid Knockout
Piping Systems
Instrumentation
Compressor Installation
Compressor Operations


Tasmanian Polytechnic

Training Centres/Campuses: Burnie, Devonport, Hobart, Invermay, Launceston, Newnham, Smithton, TAS, Australia
Phone No.: 1300 655 307

Automotive Mechanical (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

All program, subject and course offerings are correct at the time of publishing but may be subject to variation, availability and suitability.

This course provides the knowledge and skills enabling graduates to perform routine servicing of cooling systems, diesel or petrol fuel injection systems, exhaust, braking systems, final drive assemblies, steering and suspension systems and transmissions specialising in light vehicles or heavy vehicles and/or motorcycles.

You will learn about:

routine servicing of cooling systems, diesel or petrol fuel injection systems, exhaust and braking systems, final drive assemblies, steering and suspension systems and transmissions specialising in light and heavy vehicles and motorcycles.

To enrol in this program you will need:

basic skills in literacy, numeracy, computer, comprehension

This program:

leads to apprenticeship/employment


Victorian Institute of Technology

Training Centre/Campus: Melbourne, VIC, Australia
Phone No.: (613) 9670 7848

Certificate III in Automotive Mechanical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification provides students with the skills and knowledge used in the automotive mechanical technology sector. Students learn to inspect, service and repair light vehicles, apply safe working practices, carry out work observing environmental regulations and carry out diagnostic procedures. Students will work towards becoming Motor Mechanics and will learn how to diagnose, service and repair faults in light vehicle engines, fuel systems, manual and automatic transmissions, suspension, steering, drivelines, final drives, brakes and electrical systems and components..

AURC270103A

Apply Safe Working Practices

AURT271781A

Implement and monitor environmental regulations in the automotive mechanical industry


AURE218676A

Test, Service and Charge Batteries


AURTL315166A

Repair Steering Systems (light vehicle)


AURT310166A

Repair Hydraulic Brak... [Read More]


Polytechnic West

Training Centre/Campus: Perth, WA, Australia
Phone No.: (08) 9267 7500

Mechanical Trade (Metal Plating ZD) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

This is a generic qualification for the mechanical trade that provides a number of pathways for apprenticeship. Learners would identify trade training in Machinist Metal, Mechanical Fitter, Metal Plating and Plant Mechanic.

Automotive Mechanical Technology (Motor Cycles) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive mechanical technology sector which includes the inspection, service and repair of motor cycles. You will learn skills contained in the units of competence. You will also learn how to apply safe work practices and carry out diagnostic procedures.
What are the courses for further study and career opportunities?

Certificate IV in Automotive Technology

Successful completion of this qualification provides you with the opportunity of becoming a motor vehicle mechanic.

Automotive Mechanical Technology (Light Vehicle) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive mechanical technology sector which includes inspection, service and repair. It also provides you with the opportunity to specialise in an industry sector by selecting the relevant descriptor specific to your enterprise requirements. You will learn skills contained in the units of competence relevant to the descriptors. You will also learn how to apply safe work practices and carry out diagnostic procedures.
What are the courses for further study and career opportunities?

Certificate IV in Automotive Technology

Successful completion of this qualification provides you with the opportunities of becoming a motor vehicle mechanic.

Automotive Mechanical (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive mechanical service and repair industry sector. It provides you with the opportunity to specialise in the industry sector of your choice. You will also learn how to apply safe work practices and apply environmental regulations and best practice in a workplace or business.
What are the courses for further study and career opportunities?

Further study options include apprenticeships in Certificate III in Automotive Mechanical Technology or Certificate III in Automotive Specialist.

Successful completion of this qualification provides you with the opportunity to gain an apprenticeship as an automotive mechanic or progress to higher qualifications as an automotive specialist. You will need to be employed and registered as an apprentice before you can commence Certificate III training.

Automotive Mechanical Technology (Heavy Vehicle Road Transport) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive mechanical technology sector which includes inspection, service and repair. It also provides you with the opportunity to specialise in an industry sector by selecting the relevant descriptor specific to your enterprise requirements. You will learn skills contained in the units of competence relevant to the descriptors. You will also learn how to apply safe work practices and carry out diagnostic procedures.
What are the courses for further study and career opportunities?

Certificate IV in Automotive Technology

Successful completion of this qualification provides you with the opportunities of becoming a motor vehicle mechanic.

Engineering-Mechanical Trade (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This is a generic apprenticeship for the mechanical trade where learners would identify trade training in Machinist Metal, Mechanical Fitter, Metal Plating and Plant Mechanic.
What are the courses for further study and career opportunities?

Certificate IV in Automotive Technology

Successful completion of this qualification provides you with the opportunity to work within the mechanical trade.

Automotive Mechanical Technology (Heavy Vehicle Mobile Equipment) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with skills and knowledge used in the automotive mechanical technology sector which includes inspection, service and repair. It also provides you with the opportunity to specialise in an industry sector by selecting the relevant descriptor specific to your enterprise requirements. You will learn skills contained in the units of competence relevant to the descriptors. You will also learn how to apply safe work practices and carry out diagnostic procedures.
What are the courses for further study and career opportunities?

Certificate IV in Automotive Technology

Successful completion of this qualification provides you with the opportunities of becoming a motor vehicle mechanic.

Aeroskills (Mechanical) Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

If you’ve always wanted to work on and repair aircraft, this is the place to start. This course provides the foundations for a highly sought after career as a Mechanical Aircraft Maintenance Engineer. Students will learn how to repair, overhaul, test and troubleshoot all manner of aircraft mechanical systems. This may include the testing of equipment and ground support equipment and troubleshooting faults, use computers to obtain maintenance data and to complete documentation, interpreting wiring diagrams and system schematics, removal and installation of aircraft components, and reading drawings relating to maintenance activities. The course comprises core and technical Units of Competence, and gives the student an opportunity to sit CASA licensing exams. To obtain the qualification, you must complete all core units of competency plus elective units as applicable to the employer’s enterprise.

Polytechnic West’s AeroSpace Training Centre is the only training provid... [Read More]

Engineering (Pre-Apprenticeship Mechanical - Refrigeration and Air Conditioning) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing and drafting, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and maths. In this qualification you will learn in a simulated working environment and be exposed to an industrial setting on work experience. This means starting on time, setting goals, achieving work in a given time frame and working as part of a team.

Refrigeration and air conditioning mechanics?service and repair cooling systems. They regularly fix systems that have come to a halt because of electrical faults. A cooling system is made up of many different parts, including a compressor, motor and air filter. Piping may also need to be attached and joints soldered to complete a system. Refrigeration and ... [Read More]

Engineering - Mechanical Trade (Refrigeration/Air Conditioning) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

This is a generic qualification for the mechanical trade that provides a number of pathways for apprenticeship. Learners would identify trade training in Machinist Metal, Mechanical Fitter, Metal Plating and Plant Mechanic.


South West Institute of Technology Bunbury Campus

Training Centre/Campus: Bunbury, WA, Australia
Phone No.: (08) 9780 7000

MECHANICAL VEHICLE SERVICING - HEAVY ROAD TRANSPORT (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with practical skills and knowledge used in the automotive mechanical trades, light and heavy vehicle. You will learn a broad range of skills to help you decide which area of automotive you wish to follow. As part of this qualification you will undertake a supervised work placement where you will be able to apply the skills and knowledge you have learned.

CAREER OPPORTUNITIES
Successful completion of this qualification provides you with the opportunity to gain a pre-apprenticeship or an apprenticeship to become an automotive mechanic, or a tradesperson in another automotive related trade. You will need to be employed and registered as an apprentice before you can commence apprenticeship training.

MECHANICAL VEHICLE SERVICING - LIGHT (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This qualification will provide you with practical skills and knowledge used in the automotive mechanical trades, light and heavy vehicle. You will learn a broad range of skills to help you decide which area of automotive you wish to follow. As part of this qualification you will undertake a supervised work placement where you will be able to apply the skills and knowledge you have learned.

CAREER OPPORTUNITIES
Successful completion of this qualification provides you with the opportunity to gain a pre-apprenticeship or an apprenticeship to become an automotive mechanic, or a tradesperson in another automotive related trade. You will need to be employed and registered as an apprentice before you can commence apprenticeship training.

Pages: 1 2 3 4 5 6 ...

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses